User's Manual

1. On the Systems Build and Update Utility Home screen, click Change against System(s) Selection on the left pane.

The Select System(s) screen is displayed.

NOTE: Make sure that you click Select Systems to enable the Create Auto-deployment Bootable Image on the

Select Options screen.

2. Select PowerEdge R720 from the list and click the right arrow.

3. Click Save Settings and return to the Systems Build and Update Utility Home screen.

4. Configure the Systems Build and Update Utility modules.

NOTE: Follow step 1 through step 4 in Deploying Your Current Bare-Metal Dell System.

5. Create an ISO image.

For more information, see Creating An ISO image.

Deploying More Than One System With Slightly Different

Configurations

In this scenario, you can deploy more than one supported system with slightly different configurations. For example, you

can configure 50 PowerEdge R720 systems with different cards, controllers, hard drives, memory, and so on.

• The controller type must be the same as that you configured.

• The configured RAID level and RAID policy must be supported by the existing controller.