User's Manual

3. Click Configure against Server OS Installation on the Systems Build and Update Utility Home or click Server OS

Installation on the left pane.

See Server Operating System Installation Module.

You can view, edit, or reset the configuration for the module(s) by clicking View, Edit, or Reset, respectively.

4. On the Systems Build and Update Utility Home, click Apply/Export Configuration.

The Configure Apply/Export Options screen is displayed.

5. Provide your inputs as required and click Continue.

NOTE: You can choose to configure the multi-system configuration file so that system settings are taken from

this file.

NOTE: Make sure you select the Exit on Failure option to exit SBUU when a failure occurs. The system may

become unstable if this option is not selected.

The progress screen is displayed, after which the unattended update or deployment begins. SBUU continues with

hardware configuration and operating system installation, as per your configuration.

NOTE: If any of the firmware updates requires a system reboot, your system reboots automatically.

Deploying More Than One System With The Same Configuration

In this scenario, you can deploy more than one supported system with the same configuration (that is, having the same

cards, controllers, hard drive, memory, and so on), for example, 50 Dell PowerEdge R720 systems.