User's Manual

Using SBUU In Different Scenarios

This section describes some of the possible scenarios in which you can use the Dell Systems Build and Update Utility

(SBUU).

Deploying Your Current Bare-Metal Dell System

In this scenario, you can see how to update and deploy your current system.

1. Update your system firmware, if required.

See Firmware Update Module.

2. Configure your system hardware and make sure you click Save Settings before you navigate away from a

component screen.

See Hardware Configuration Module.

NOTE: Ensure that you configure Redundant Array of Independent Disks (RAID) to proceed beyond the

Configure RAID screen in the Configure Server Operating System Installation module.