User's Manual
Table Of Contents
- Dell Systems Build And Update Utility Version 2.2 User's Guide
- About Dell OpenManage Systems Build And Update Utility
- Launching SBUU
- Using SBUU In Different Scenarios
- Deploying Your Current Bare-Metal Dell System
- Deploying More Than One System With The Same Configuration
- Deploying More Than One System With Slightly Different Configurations
- Deploying Multiple Systems Of Different Models
- Deploying Multiple Systems With The Same Configuration And Different Operating Systems
- Reusing Configuration Files
- Creating Bootable USB
- Creating an ISO image
- Frequently Asked Questions
1. On the Systems Build and Update Utility Home screen, click Change against System(s) Selection on the left pane.
The Select System(s) screen is displayed.
NOTE: Make sure that you click Select Systems to enable the Create Auto-deployment Bootable Image on the
Select Options screen.
2. Select PowerEdge R720 from the list and click the right arrow.
3. Click Save Settings and return to the Systems Build and Update Utility Home screen.
4. Configure the Systems Build and Update Utility modules.
See step 1 through step 4 in Deploying Your Current Bare-Metal Dell System.
5. Create an ISO image.
For more information, see Creating An ISO image.
18