User's Manual
Table Of Contents
- Dell Systems Build And Update Utility Version 2.2 User's Guide
- About Dell OpenManage Systems Build And Update Utility
- Launching SBUU
- Using SBUU In Different Scenarios
- Deploying Your Current Bare-Metal Dell System
- Deploying More Than One System With The Same Configuration
- Deploying More Than One System With Slightly Different Configurations
- Deploying Multiple Systems Of Different Models
- Deploying Multiple Systems With The Same Configuration And Different Operating Systems
- Reusing Configuration Files
- Creating Bootable USB
- Creating an ISO image
- Frequently Asked Questions
1. Update your system firmware, if required.
See Firmware Update Module.
2. Configure your system hardware and make sure you click Save Settings before you navigate away from a
component screen.
See Hardware Configuration Module.
NOTE: Ensure that you configure Redundant Array of Independent Disks (RAID) to proceed beyond the
Configure RAID screen in the Configure Server Operating System Installation module.
3. Click Configure against Server OS Installation on the Systems Build and Update Utility Home or click Server OS
Installation on the left pane.
See Server Operating System Installation Module.
16