Owner's Manual

Issue 6
Description: OS Installation: Windows Server 2008 (32 and 64 bit), VMware ESX apply options page does
not have OS ISO location specified, as these installations require OS ISO at runtime, when the OS is getting
installed. SBUU boots to hard disk and prompts for OS ISO DVD, which you must provide. These
installations do not work on network. They are for standalone servers.
Issue 7
Description: When you select the Embedded NIC and/or Redundant Memory token in the BIOS section in
the Hardware Config page, the options shown for this token are a superset. If you select an option which is
not supported in the current system, application of hardware scripts fail and if you select the Exit on Failure
option, the deploy operation stops.
Issue 8
Description: In NFS shares, when you use the operating system ISOs from a network location and during
copy operation, if the network is disconnected for a while and then reconnected, the copy operation
resumes, but in case of SMB/Windows share, the copy operation does not resume. Disconnection on a
SMB/Windows share results in an error and you must reboot and re-run the operation.
Issue 9
Description: Do not export configuration files from PE to SC servers and SC servers to PE as this is not
supported.
Issue 10
Description: On Dell PowerEdge systems with internal USB, BIOS setting configuration for internal USB Port
is possible only if User Accessible/external (UA) USB ports are set to All Ports On. If UA USB ports are not
set to All Ports On and you attempt configuring the BIOS setting for internal USB Port using Server
Administrator GUI or CLI, the configuration appears to be successful, but the changes are not effective on
reboot. If UA USB ports settings are changed from All Ports On to All Ports Off or Only Back Ports On, the
USB is automatically set to Off during the next reboot.
Issue 11
Description: SBUU does not boot through DVD under BIOS in UEFI mode.
Issue 12
Description: If you return to a page, including the Home page, directly from the operating system
installation page, it may take some time for the new page to load.
Issue 13
Description: SBUU does not support the USCBOOT feature (available in F3 Advanced Options) on 12G
systems, as an appropriate command is not available from IPMI.