User's Manual

8 About Dell OpenManage Systems Build and Update Utility
If you select NFS, enter the IP Address/Hostname and Network Share
details.
If you select SMB, enter the
IP Address/Hostname , Network Share , User
Name
, and Password details.
3 Click Continue .
The comparison report is displayed on the
Comparison Report screen.
If the media is unavailable the following error message appears:
Unable to recognize the media. It may be blank,
damaged, or the format is not supported.
Click OK .
Insert the media and click
Continue .
NOTE: You can selectively upgrade components depending on your
requirement. However, you cannot perform selective downgrades.
4 Select any components that you want to upgrade and click Systems Build
and Update Utility Home
.
NOTE: SBUU saves the information about the repository and the selections
you made on the Comparison Report screen. These updates are applied
during the actual deployment.
5 To update your current system, click Apply/Export Configuration .
The
Configure Apply /Export Options screen is displayed.
6 Select Apply Configuration to Current System and click Apply/Export .
The progress bar is displayed after which your system reboots with the
firmware updates configured.
Hardware Configuration Module
The Hardware Configuration module in SBUU enables you to configure your
system’s Baseboard Management Controller (BMC), Dell Remote Access
Controller (DRAC), Redundant Array of Independent Disks (RAID), and
BIOS.
Once you save the configuration settings, you can use the tool to generate the
.ini file and apply these configuration settings across multiple systems.