Owner's Manual

If you configure the BIOS or iDRAC6 entry with Setup Password Override checkbox under Power section and then you Export
the configurations and Import the same configuration and View/Edit the imported configuration. User will see that the
Setup Password Override checkbox is not selected.
Uncertified array disks, if present in the system, are displayed in the SBUU RAID configuration GUI but are not used while
creating RAID using configuration scripts.
The options shown in SBUU for BIOS tokens in the BIOS page, in the Hardware Config screen, are a superset. The default
values do not reflect the current status of the tokens. If the user selects an option which is not supported in the current
system, applying Hardware Scripts will fail. User should select a value that is applicable on the current system.
Notes for Windows Operating Systems
If you are using the SBUU iso image downloaded from the support site at support.dell.com and installing Microsoft Windows
2008. You must download Windows OS Install Support Pack from the support site. Create your own optical media from the
Windows OS Install Support Pack and make it available for SBUU, when prompted.
During Windows installation, the system will automatically log in to finish the post-installation tasks and then automatically
log out. It is recommended that you do not perform any task until the system has automatically logged out. The installation
might end abnormally if it is interrupted.
If you enable "Console Redirection":
• A dialog box displays that an Expanded Memory Support (EMS) connection has been discovered during the
operating system installation.
• You enter the organization name and computer name, an error message displays that "unattend.txt" is incomplete
and prompts you to enter the username. Enter the username to continue with the unattended setup operation.
In the advanced Enter OS Information screen, enter all the IP addresses for the Trap Destination field separated by commas.
Do not enter trailing commas; the installation will stop when the Windows Setup program runs.
If you install Windows Server 2003 Web Edition using Dell Systems Build, Update Utility Internet Information Server (IIS) is
installed by default. You must choose New Technology File System (NTFS) to ensure all of IIS components install correctly. If
your platform supports Windows HPC 2008 or Windows HPC 2008 R2 editions, select Windows 2008 (64-bit) and Windows
2008 R2 (64-bit) respectively on the Configure Server OS Installation page, and use the appropriate Windows media when
prompted.
Notes for the Tool to Create Bootable USB
The following commands/rpm should be installed for the tool to work: udevinfo, mtools, parted (minimum version required
is 1.6.25.1), grub-install (grub) and lsusb.
By default, the boot to hard disk option is configured to boot to second partition of the first hard disk of primary controller
master (hd0, 1). If the OS is installed in other disk or partitions the GRUB boot entry should be edited accordingly. Please
check GRUB manual for further details.