Owner's Manual

Issue 21
Description: iDRAC users created through SBUU do not get enabled. To enable these users, user will have to go to DRAC
(DRAC5 or iDRAC) GUI and set the user privilege level to desired level (Administrator, Operator, and so on).
Issue 22
Description: When you create usernames for DRAC using SBUU, ensure that they do not contain the "&" character. However,
you can use "&" to create usernames in DRAC (DRAC5 or iDRAC) GUI.
Issue 23
Description: When you insert multiple USB keys into your system, SBUU uses the last inserted USB key which has a repository
that is applicable to the platform to which your system belongs and is compatible with the SBUU repository.
Issue 24
Description: SBUU does not allow you to delete any single virtual disk, if the last virtual disk has utilized full space in the
selected disk group. It will automatically select and delete all the virtual disks in the selected disk group.
Issue 25
Description: BMC DUPs cannot be updated from SBUU, SBUU deployment will fail if you select this DUP in the firmware
update screen. Users should update the firmware after installing the OS.
Open Issues and Resolutions for LINUX Operating
Systems
Issue 1
Description: When you are using the "Dell Systems Management Tools and Documentation" DVD through DRAC/iDRAC, SBUU
may not eject the DVD before asking you to insert the operating system media. This displays the error message, "Invalid
media inserted."
Issue 2
Description: To correct this, unmount the DVD from DRAC/iDRAC; then insert the correct operating system media and
mount the drive again.
Issue 3
Description: It has been observed that certain CD burning software fail to prepare the media to pass the media check.