User's Manual

Using SBUU 23
Installing the Operating System
1 On the Systems Build and Update Utility Home screen, click Configure
against
Server OS Installation or click Server OS Installation on the
left pane.
The
Set the Date and Time screen appears.
NOTE: If you want to install ESXi Flash or HDD, insert an SD card or USB key.
2 Make the required changes and click Continue .
The
Select an Operating System to Install screen appears.
3 Select the appropriate operating system, choose whether you want to
create a utility partition, and click
Continue .
NOTE: The utility partition does not have DOS-based RAID tools.
For this procedure, let us assume that you select the Microsoft Windows
Server 2003 R2 operating system and choose to create a utility partition.
The
Select RAID Configuration screen appears.
4 Indicate whether you want to apply the RAID configuration that you
specified while configuring your system hardware in the
Hardware
Configuration
module or retain the existing RAID configuration on your
system and click
Continue .
The
Configure the Disk Partition for Microsoft Windows Server 2003 R2
screen
appears.
5 Select the file system for boot partition, enter the size of the virtual disk
available, and click
Continue .
The
Network Adapter(s) Configuration screen appears.
6 Enter the appropriate information about the network adapters on your
system. Click
Continue .
The
Enter Configuration Information for Microsoft Windows Server
2003 R2
screen appears.
7 Fill in the appropriate fields and click Continue .
The
Operating System Installation Summary screen appears.
8 Click Back to change settings if required.