User's Manual

10 Overview
2 Press <F3>.
The
Advanced Options window/screen is displayed.
3 Select USCBOOT to reboot the system to USC.
NOTE: USC boot is supported only on 11g or later systems.
NOTE: Ensure that iDRAC6/BMC and uEFI BIOS is preset and configured, and
System Services and IMPI are enabled.
On 11g or later systems, you have an option to use USC or continue with
SBUU.
Other Documents You May Need
In addition to this guide and SBUU online help, you might need to refer to
the following documents to get details on specific SBUU modules and Dell
OpenManage products. These documents are available at
support.dell.com/manuals.
On the Manuals page, click Software Systems Management. Click the
appropriate product link on the right-side to access the documents.
•The Dell Remote Access Controller 5 Firmware User's Guide provides
comprehensive information about using the
RACADM command line
utility to configure a DRAC 5.
•The
Dell Chassis Management Controller User’s Guide provides
comprehensive information about using the controller that manages all
modules in the chassis containing your Dell system.
•The
Integrated Dell Remote Access Controller User’s Guide provides
information about installation, configuration, and maintenance of the
Integrated Dell Remote Access Controller
( iDRAC) on management and
managed systems.
•The
Command Line Reference Guide for iDRAC6 and CMC provides
information about the RACADM subcommands, supported interfaces,
property database groups and object definitions for iDRAC6 and CMC.
•The
Dell Baseboard Management Controller Utilities User's Guide provides
information about configuring a managed system to use the BMC
Management Utility to manage your system through its BMC.