Release Notes

file:///T|/htdocs/SOFTWARE/smsbu/1_6/EN/readme/SBU_read.txt[10/23/2012 10:51:41 AM]
will have to be set manually once the operating system is installed.
* If the Systems Build and Update Utility GUI disappear and a blank
screen is displayed, restart your system. This issue occurs if you
right-click to open a new browser window (from the "Quick Reference
Guide" window) and select "Quit" from the "File" menu.
* In order to use the RAID configuration feature of Systems Build and
Update Utility to configure RAID and install the operating system,
the "Fast Initialization" parameter of the RAID controller must be
set to "ON." This setting is the factory default of all RAID
controllers.
* Do not insert or remove any hot-swappable drives until the
operating system is completely installed while using the "Systems
Build and Update Utility". The results may be unpredictable and the
installation may fail.
* Replication is supported on systems with multiple controllers,
provided the controllers are in an initialized state. This is
applicable to both master and target systems.
* If you configure RAID manually and use Systems Build and Update
Utility to install an operating system on a master system, then you
need to manually configure RAID on the target system as well.
* Use local accounts for creating the SMB share on Windows on which
the RPMs will reside for the network download feature.
* Systems Build and Update Utility does not support the installation
of tape or Fibre Channel drivers with the operating system
installation. You can download the drivers for these devices from the
Dell Systems Service and Diagnostics Tools on the "Dell Systems
Management Tools and Documentation" DVD or from the Dell Support
website at "support.dell.com".
* The "Keyboard Type" locale option offered for a keyboard layout on
the systems Build and Update Utility home page is for the Systems
Build and Update Utility screens navigation only. The selected
keyboard layout setting is not passed to the installed Operating
System.
Even after you select any language other than English under "Select
Language" and "Keyboard Type" on the "Home" page, the input language
will be English. That is, the text you enter in the text fields in
the GUI will appear in English.
* Do not use the Dell Remote Access Controller (DRAC) virtual media
to run "Firmware Update" on the system. This procedure breaks the
virtual media connection, causing the firmware update procedure to
fail.
* In Firmware Update page, if user selects "Refresh USB devices", user should
wait for the devices to be listed, or a popup informing that no devices