Release Notes

file:///T|/htdocs/SOFTWARE/smsbu/1_6/EN/readme/SBU_read.txt[10/23/2012 10:51:41 AM]
device before you begin installing the operating system.
* The Edit option shown on the SBUU homepage after Hardware
Configuration section is configured, will allow the user only to view
all the created Virtual Disks and user is allowed to add or remove
Virtual Disks. User will not be allowed to edit the settings of
already configured Virtual Disk.
* When an external storage enclosure is connected to the storage
controller, RAID can be configured on that controller using SBUU.
But, SBUU will not support installing an Operating System on the
Virtual Disk which is created on the controller connecting to an
external storage enclosure.
* iDRAC users created through SBUU do not get enabled. To enable
these users, user will have to go to DRAC (DRAC5 or iDRAC) GUI and
set the user privilege level to desired level (Administrator,
Operator etc).
* When you create usernames for DRAC using SBUU, ensure that they do not
contain the "&" character. However, you can use "&" to create usernames in
DRAC (DRAC5 or iDRAC) GUI.
* When you insert multiple USB keys into your system, Systems Build and
Update Utility uses the last inserted USB key which has a repository
that is applicable to the platform to which your system belongs and
is compatible with the Systems Build and Update Utility repository.
* Systems Build and Updates Utility will not allow you to delete any single
virtual disk if the last virtual disk has utilized full space in the selected
disk group. It will automatically select and delete all the virtual disks in
the selected disk group.
* BMC DUPs cannot be updated from SBUU, SBUU deployment will fail if you select
this DUP in the firmware update screen. Users should update the firmware
after installing the OS.
======================================================================
KNOWN ISSUES FOR LINUX OPERATING SYSTEMS
======================================================================
When you are using the "Dell Systems Management Tools and
Documentation" DVD through DRAC/iDRAC, Systems Build and Update Utility may
not eject the DVD before asking you to insert the operating system
media. This displays the error message, "Invalid media inserted."
To correct this, unmount the DVD from DRAC/iDRAC; then insert the correct
operating system media and mount the drive again.
======================================================================
KNOWN ISSUES FOR RED HAT ENTERPRISE LINUX OPERATING SYSTEMS
======================================================================