User's Manual

Using SBUU 21
3 After you configure fields on each component screen and before you
navigate away from the screen, click
Save Settings and then click Go Back
to Configuration Summary
.
4 On the Configuration Status Summary screen, click Save Settings and Go
Back to Home Page
.
5 On the Systems Build and Update Utility Home screen,
click
Apply/Export Configuration .
The
Configure Apply/Export Options screen appears with the Apply
Configuration to Current System
option selected, by default.
You can export the hardware configuration for later use by selecting
Export
Configuration
.
6 Click Apply/Export .
A progress bar appears indicating that the configuration changes you saved in
step 3 are being applied to your system. After the changes are applied, your
system reboots automatically and is ready for use with the updated
configuration.
For Multiple Systems
1 On the Systems Build and Update Utility Home screen, click Change
against
System(s) Selection on the left pane.
The
Select System(s) screen appears.
2 Select the system(s) on which you want to deploy the hardware
configuration you specify.
NOTE: To generate a bootable ISO image to deploy a hardware configuration
to multiple systems, you must select all the required systems on the Select
System(s) screen even if they are of the same model as your current system
on which you are running SBUU.
3 Click Save Settings .
The
Systems Build and Update Utility Home screen reappears listing the
selected systems under
System(s) Selection .
4 Click Configure against Hardware Configuration or Hardware
Configuration
on the left pane.
The
Configuration Status Summary screen appears.