Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_5/EN/readme/readme.txt[10/23/2012 1:02:13 PM]
Virtual Disk which is created on the controller connecting to an
external storage enclosure.
* iDRAC users created through SBUU do not get enabled. To enable
these users, user will have to go to DRAC (DRAC5 or iDRAC) GUI and
set the user privilege level to desired level (Administrator,
Operator etc).
* When you create usernames for DRAC using SBUU, ensure that they do not
contain the "&" character. However, you can use "&" to create usernames in
DRAC (DRAC5 or iDRAC) GUI.
* When you insert multiple USB keys into your system, Systems Build and
Update Utility uses the last inserted USB key which has a repository
that is applicable to the platform to which your system belongs and
is compatible with the Systems Build and Update Utility repository.
* Systems Build and Updates Utility will not allow you to delete any single
virtual disk if the last virtual disk has utilized full space in the selected
disk group. It will automatically select and delete all the virtual disks in
the selected disk group.
* BMC DUPs cannot be updated from SBUU, SBUU deployment will fail if you select
this DUP in the firmware update screen. Users should update the firmware
after installing the OS.
======================================================================
KNOWN ISSUES FOR LINUX OPERATING SYSTEMS
======================================================================
When you are using the "Dell Systems Management Tools and
Documentation" DVD through DRAC/iDRAC, Systems Build and Update Utility may
not eject the DVD before asking you to insert the operating system
media. This displays the error message, "Invalid media inserted."
To correct this, unmount the DVD from DRAC/iDRAC; then insert the correct
operating system media and mount the drive again.
======================================================================
KNOWN ISSUES FOR RED HAT ENTERPRISE LINUX OPERATING SYSTEMS
======================================================================
* When using the "Dell PowerEdge Installation and Server Management"
CD/DVD media for new RAID configurations, installation
of the Red Hat Enterprise Linux operating system may fail if both the
USB CD and USB floppy are connected. To avoid the installation
failure, remove the USB floppy connection before rebooting the system
with the CD/DVD for the installation process.
* Installation of Red Hat Enterprise Linux (version 4) operating
system is not supported on any system having the following
controllers: