User's Manual

36 Using SBUU
Reusing Configuration Files
In this scenario, you can import and reuse a configuration file that you
created and exported in an earlier session. You can use this configuration file
and create multiple ISO images with slightly different configuration.
This configuration can be for the current system or for multiple systems.
However, you need to create separate ISO images for every variation of the
multiple systems deployment. For the current system, you can directly apply
the configuration you imported, with slight modifications, if required.
NOTE: When you import the configuration file, all the GUI fields
are populated.
You can edit the Firmware Update Configuration, Hardware
Configuration, and Configure SOI modules, as required. However, ensure
that you do not make any changes on the System(s) Selection screen; if
you do so, all existing configuration for the three modules will be reset.