Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_3/en/readme/readme.txt[10/23/2012 1:07:18 PM]
Build and Update Utility screens navigation only. The selected
keyboard layout setting is not passed to the installed Operating
System.
Even after you select any language other than English under "Select
Language" and "Keyboard Type" on the "Home" page, the input language
will be English. That is, the text you enter in the text fields in
the GUI will appear in English.
* Do not use the Dell Remote Access Controller (DRAC) virtual media
to run "Firmware Update" on the system. This procedure breaks the
virtual media connection, causing the firmware update procedure to
fail.
* USB keys formatted with NT File System (NTFS) or file allocation
table (FAT16) are not supported.
* Any network or Windows share or CD/DVD that you use an input to the
Repository must not contain any extra file or folder that is not part
of the Server Update Utility (SUU) content.
* When you select the "No Change" option for Trusted Platform Module
(TPM) Activation, under Boot sequence and security tab, the TPM
activation token will not be saved to the ".ini" file.
* "Digitally sign communications" enabled Windows share on a system
running on Windows cannot be accessed. To access the share, disable
this feature on the Windows system.
* When you insert multiple USB keys into your system, Systems Build
and Update Utility uses the last inserted USB key which has a
repository that is applicable to the platform to which your system
belongs and is compatible with the Systems Build and Update Utility
repository.
* The selections on Set the Date and Time page in SOI will show
default values (not the earlier selected values) when the user
re-visits the page by clicking Back or Edit. The user selected
values will be stored internally and will be applied to the
system when user opts to apply.
* The Advanced Mode allows you to specify the size of the virtual disk.
The specified value will be used while creating RAID and will not be
validated against the existing disks on the system.
* OS Installation: Windows Server 2008 (32 and 64 bit), VMware ESX apply
options screen will not have OS ISO location specified as these
installation require OS ISO at runtime when OS is getting installed.
SBUU will boot to hard disk and then ask for OS ISO DVD and then user
has to supply it. These installations do not work on network. They
are for standalone servers.
* When the User selects the Embedded NIC and/or Redundant Memory
token in the BIOS page in the Hardware Config screen, the options
shown for this token are a superset. If the user selects an option