Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_3/en/readme/readme.txt[10/23/2012 1:07:18 PM]
* When an external storage enclosure is connected to the storage
controller, RAID can be configured on that controller using SBUU.
But, SBUU will not support installing an Operating System on the
Virtual Disk which is created on the controller connecting to an
external storage enclosure.
* iDRAC users created through SBUU do not get enabled. To enable
these users, user will have to go to DRAC (DRAC5 or iDRAC) GUI and
set the user privilege level to desired level (Administrator,
Operator etc).
* When you insert multiple USB keys into your system, Systems Build and
Update Utility uses the last inserted USB key which has a repository
that is applicable to the platform to which your system belongs and
is compatible with the Systems Build and Update Utility repository.
* Systems Build and Updates Utility will not allow you to delete any
single virtual disk if the last virtual disk has utilized full space
in the selected disk group. It will automatically select and delete
all the virtual disks in the selected disk group.
======================================================================
KNOWN ISSUES FOR LINUX OPERATING SYSTEMS
======================================================================
When you are using the "Dell Systems Management Tools and
Documentation" DVD through DRAC, Systems Build and Update Utility may
not eject the DVD before asking you to insert the operating system
media. This displays the error message, "Invalid media inserted."
To correct this, unmount the DVD from DRAC; then insert the correct
operating system media and mount the drive again.
======================================================================
KNOWN ISSUES FOR RED HAT ENTERPRISE LINUX OPERATING SYSTEMS
======================================================================
* When using the "Dell PowerEdge Installation and Server Management"
CD/DVD media for new RAID configurations, installation
of the Red Hat Enterprise Linux operating system may fail if both
the USB CD and USB floppy are connected. To avoid the
installation failure, remove the USB floppy connection before
rebooting the system with the CD/DVD for the installation process.
* Installation of Red Hat Enterprise Linux (version 4) operating
system is not supported on any system having the following
controllers:
* CERC ATA 4ch
NOTE: In the above case, the option to install Red Hat Enterprise