User's Manual
Table Of Contents
- About This Document
- Dell Systems Build and Update Utility Overview
- Before You Begin Using the Systems Build and Update Utility
- Launching the Systems Build and Update Utility
- Using the Systems Build and Update Utility
- Flexibility That the Systems Build and Update Utility Offers
- Using the Systems Build and Update Utility in Different Scenarios
- Updating Your System Firmware
- Configuring Your System Hardware
- Installing the Operating System
- Deploying Your Current ("Bare-Metal") Dell System
- Deploying More Than One System With the Same Configuration
- Deploying More Than One System With Slightly Different Configurations
- Deploying Multiple Systems of Different Models
- Deploying Multiple Systems With the Same Configuration for Different Operating Systems
- Reusing Configuration Files
- Important Information and Frequently Asked Questions
- Glossary
- Index
42 Using the Systems Build and Update Utility
Important!
• When you import the configuration file, all the GUI fields are populated.
• You can edit the Firmware Update Configuration, Hardware Configuration,
and Configure SOI modules, as required. However, ensure that you do not
make any changes on the System(s) Selection screen; if you do so, all existing
configuration for the three modules will be reset.
1
On the
Systems Build and Update Utility Home
screen, click
Import
Saved Configuration
.
The
Import Configuration
screen appears.
2
Specify the location from where you want to import the configuration file
and click
Continue
.
The progress screen appears, followed by the
Imported Configuration File
Details
screen.