User's Manual

30 Using the Systems Build and Update Utility
7 On the Configuration Status Summary screen, click Save Settings and
Go Back to Home Page
.
8 On the Systems Build and Update Utility Home screen,
click
Apply/Export Configuration .
The
Configure Apply/Export Options screen appears with the Create
Auto-Deployment Bootable Image
option selected, by default.
You can export the hardware configuration for later use by selecting
Export Configuration .
9 Click Destination to provide the location where you want to save the
bootable ISO image.
The
ISO Save Location screen appears.
10 Specify the location and click Continue .
11 Click Apply/Export .
The ISO image is generated and saved in the location you specified in the
preceding step. If the destination you specified is not a bootable USB key,
burn the ISO image using any CD/DVD burning software application on
to a CD or a DVD.
12 Boot the selected systems with the bootable media you created.
The deployment starts automatically and you will not be prompted for any
inputs. The system reboots as and when required until the selected systems
are ready with the updated configuration.
Installing the Operating System
1 On the Systems Build and Update Utility Home screen, click Configure
against
Server OS Installation or click Server OS Installation on the
left pane.
The
Set the Date and Time screen appears.
2 Make the required changes and click Continue .
The
Select an Operating System to Install screen appears.