Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_2/en/readme/readme.txt[10/23/2012 1:18:45 PM]

* The "View/Edit/Reset" becomes enabled for the "Firmware Update"

even if user does not select any components for update.

When user visits the "Firmware Update", specifies the Server Update

Utility ( repository) location either using the DVD or NFS or SMB

or USB media, views the comparison report. If the server comparison

report does not have any updatable components, user cannot configure

anything in this page and user returns to the home page.

However since the user configured the repository, the

"View/Edit/Reset" option on the home page will be enabled irrespective

of user's configuration of the firmware updates.

######################################################################

Information in this document is subject to change without notice.

Reproduction in any manner, whatsoever without the written permission

of Dell Inc. is strictly prohibited.

Trademarks used in this text: "Dell," "PowerVault", "PowerEdge," and

"Dell OpenManage" are trademarks of Dell Inc.; "Microsoft" and

"Windows" and "Windows Server" are either trademarks or registered

trademarks of Microsoft Corporation; "SUSE", "NetWare" are registered

trademarks of Novell, Inc.; "Intel" is a registered trademark of

Intel Corporation; "Red Hat" and "Red Hat Enterprise Linux" are

registered trademark of Red Hat, Inc; "VMware" is a registered

trademark and "ESX Server" is a trademark of VMware, Inc; Conexant is

a registered trademark of Conexant Inc.

Other trademarks and trade names may be used in this document to

refer to either the entities claiming the marks and names or their

products.

Dell Inc. disclaims any proprietary interest in trademarks and trade

names other than its own.