User's Manual

Launching the Systems Build and Update Utility 21
Launching the Systems Build and
Update Utility
To launch the Dell™ Systems Build and Update Utility:
1
Insert the Dell Systems Management Tools and Documentation DVD in
your system drive.
2 Reboot your system.
The boot menu screen displays.
Figure 4-1 shows the boot menu screen.
Alternately, you can launch the Systems Build and Update Utility on a
remote system as follows:
1
On your client system, access the Dell Remote Access Controller (DRAC)
4 or DRAC 5 GUI.
2 Click the Media tab.
3 The Virtual Media screen displays.
NOTE: If the Virtual Media Active X Control is not installed on the system, you will
be prompted to install it before you proceed.
4 Ensure that the attribute for Attach/Detach Status is Attached .
To access the location of the
Systems Build and Update Utility bootable
media or the ISO image of the
Dell Systems Management Tools and
Documentation
DVD, select your system drive location or browse against
ISO Image File , as appropriate.
Click
Connect .
5 The Virtual Media Status screen displays. The Dell Systems Management
Tools and Documentation
media is now connected to your host system.
Click Power Management.