Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1.0/en/readme/readme.txt[10/25/2012 1:33:14 PM]
* Entering a double quote character (") in the "Root Password" field
of the Red Hat Enterprise Linux installation will result in denial
of access to the root "log in."
* Systems Build and Update Utility limits the maximum block device
size on a Linux system to 8 TB.
* A network download of RPMs requires that the target system have a
DHCP IP address and that the system is connected to a network.
* While configuring the hard drive on a system to install a Red Hat
Enterprise Linux operating system, if the hard drive space on your
system is used completely and the range specified in the GUI
against the "swap" partition is the same
(for example [1024 -1024] MB), the scroll bar remains to the
left side.
======================================================================
USER NOTES FOR VMware ESX
======================================================================
* You will need ESX 3.0.2 plus a hardware support patch to support
following systems and devices:
- AMD Opteron 2300 and 8300 processor families
- Intel Xeon E5400/L5400/X5400, E5200/L5200, and E7300/L7300/X7300
processor families
- Dell PERC 6 and SAS 6 family SAS controllers
- SATA Optical Drives
- Dell systems R900, 1950, 2900, and 2950
For details on the hardware support and ESX build number, see
"www.dell.com/vmware" on the Dell Support website at
"support.dell.com." Also, see the "Dell OpenManage Server
Administrator Compatibility Guide," the "Dell Systems Software
Support Matrix," and the "Dell OpenManage Deployment Toolkit User's
Guide."
######################################################################
KNOWN ISSUES
######################################################################
The following subsections list the known issues with this release of
Systems Build and Update Utility.
* On PowerEdge 1950, 2950 and PowerVault NX 1950 systems with
internal USB, BIOS setting configuration for internal USB Port is
possible only if User Accessible/external (UA) USB ports are set to
"All Ports On." If UA USB ports are not set to "All Ports On"