Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1.0/en/readme/readme.txt[10/25/2012 1:33:14 PM]
* The Server Setup program does not support the installation of
Windows 2000 Datacenter.
* If you enable "Console Redirection":
- a dialog box displays that an Expanded Memory Support (EMS)
connection has been discovered during the operating system
installation.
- and you enter the organization name and computer name, an
error message displays that "unattend.txt" is incomplete and
and prompts you to enter the username. Enter the username to
continue with the unattended setup operation.
* It is recommended that you use Windows 2000 with Service Pack 4
(or higher) integrated CD for the Windows 2000 installation if
your system has the Conexant modem. Otherwise, the installation
of Windows 2000 will stop responding while devices are being
installed. Reboot the system to resolve the issue.
* On Windows 2000 Advanced Server operating system, if you uninstall
and then reinstall Cluster Service, you may get an incorrect prompt
to insert a "Service Pack" CD. Insert the "Microsoft Windows 2000
Advanced Server" CD instead.
* In the Advanced "Enter OS Information" screen, enter all IP
addresses for the "Trap Destination" field separated by commas. Do
not enter trailing commas, or the installation will stop when the
Windows Setup program runs.
* On PowerEdge 700 and 750 systems, a yellow bang appears against
The USB controller symbol after the operating system is
installed. However, USB devices will work correctly when connected.
* If you install Windows Server 2003 Web Edition using Dell Systems
Build and Update Utility Internet Information Server (IIS) is
installed by default. You should choose NT File System (NTFS)
to ensure all of IIS components install correctly.
======================================================================
USER NOTES FOR RED HAT ENTERPRISE LINUX OPERATING SYSTEMS
======================================================================
* At least 14.1 GB disk space is required to install Red Hat
Enterprise Linux.
* If you use the "Download RPMs from Network" feature, the RPMs are
downloaded to the partition called "/home." The recommended size for
this partition is 3 GB plus the size of the RPMs you want to update.
All downloaded RPMs are installed during the post install phase of
the Red Hat Enterprise Linux installer.