Quick Reference Guide

Hardware Configuration Scripting Tool 31
One-To-Many Scenario
For details on how to use the .ini file to update multiple systems, see the
Deployment Toolkit User's Guide.
Anything Else I Should Know?
If you are creating a virtual disk
• If you create a virtual disk by specifying the size (instead of using the
Select to create maximum virtual disk size option), subsequent virtual
disks that you create will be bound to the controller and the array disk that
you selected. This condition is valid until you exhaust all the available
space on that array disk.
• When you select a virtual disk to delete, and that virtual disk is just one of
the virtual disks that was created using a particular array disk, all the
virtual disks created on that array disk will be selected for deletion.
If you are using a USB key as your destination location
• If you are using a USB key as your destination location for the .ini file,
insert the USB key when you are prompted.
NOTE: It is recommended that you do not boot your system to Systems Build
and Update Utility with the USB key inserted in your system.