Quick Reference Guide

Hardware Configuration Scripting Tool 29
Hardware Configuration
Scripting Tool
The Hardware Configuration Scripting Tool in the Dell™ Systems Build and
Update Utility enables you to configure your system’s Baseboard
Management Controller (BMC), Dell Remote Access Controller (DRAC),
Redundant Array of Independent Disks (RAID), and BIOS.
Once you save the configuration settings for your system’s BMC, DRAC,
RAID, and BIOS, you can use the tool to generate the .ini file, and apply
these configuration settings across multiple systems.
How Do I Access The Hardware Configuration
Scripting Tool?
To access the GUI:
1
From the Dell Systems Build and Update Utility Home page, click
HW Config Scripting Tool .
The
Configuration Status Summary screen displays.
2 From this page, you can configure your system’s BMC, DRAC, RAID,
and BIOS by clicking on the specific component.
NOTE: For more information on the specific configuration screens and what you
can do on each screen, see the online help.
How Do I Access The Command Line Interface?
To access the command line interface:
From the boot menu, select DTK Command Line Interface (Linux).