Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_0_7/en/readme/readme.txt[10/26/2012 2:42:30 PM]
share, disable this feature on the Windows system.
* When you insert multiple USB keys into your system, Systems
Build and Update Utility uses the last inserted USB key
which has a repository that is applicable to the platform
to which your system belongs and is compatible with the
Systems Build and Update Utility repository.
* On the "Create Virtual Disk" screen, when you navigate from the
Express option to the Advanced option, and then return to Express
option, the minimum and maximum values of the virtual disk size
are not restored properly. You must reselect the RAID level for
the values to be updated.
* You cannot create RAID using Systems Build and Update Utility on
PERC 4/IM controllers because of firmware and driver issues. To
create RAID on PERC 4/IM controllers, first configure the RAID using
the controller BIOS utility. Subsequently, when you are installing
the operating system using Systems Build and Update Utility, choose
the option to use the existing RAID.
======================================================================
USER NOTES FOR WINDOWS OPERATING SYSTEMS
======================================================================
* During Windows installation, the system will automatically log on
to finish the post-installation tasks and will then automatically
log out. It is recommended that you do not perform any task until
the system has automatically logged out. Installation might end
incorrectly if the installation process is interrupted.
* The Server Setup program does not support the installation of
Windows 2000 Datacenter.
* If you enable "Console Redirection":
- a dialog box displays that an Expanded Memory Support (EMS)
connection has been discovered during the operating system
installation.
- and you enter the organization name and computer name, an
error message displays that "unattend.txt" is incomplete and
and prompts you to enter the username. Enter the username to
continue with the unattended setup operation.
* It is recommended that you use Windows 2000 with Service Pack 4
(or higher) integrated CD for the Windows 2000 installation if
your system has the Conexant modem. Otherwise, the installation
of Windows 2000 will stop responding while devices are being
installed. Reboot the system to resolve the issue.
* On Windows 2000 Advanced Server operating system, if you uninstall
and then reinstall Cluster Service, you may get an incorrect prompt