Owner's Manual

file:///T|/htdocs/SOFTWARE/smsbu/1_0_7/en/readme/readme.txt[10/26/2012 2:42:30 PM]
option, the "Home" page for "Dell Systems Build and Update
Utility" displays. From the "Home" page, you can access the
Systems Build and Update Utility modules:
* Server Operating System Installation
* View Hardware Details
* Firmware Update
* Update Utility Creation
* Hardware Configuration Scripting Tool
######################################################################
USER NOTES
######################################################################
This section provides information to help enhance your experience
with Systems Build and Update Utility.
======================================================================
GENERAL NOTES
======================================================================
* The following languages are supported by Systems Build and
Update Utility:
* English
* French
* German
* Spanish
* Simplified Chinese
* Japanese
* See the "readme.txt" under the folder
"/server_assistant/driver_tool" for all details on the driver
extracting utility.
* The utility partition does not have DOS-based RAID tools.
* For operating systems such as ESX, the native Graphical User
installation tool provided by the operating system installation
media is used. Setting date and time zone in the Systems Build
and Update Utility setup screen does not apply to ESX.
* If the Systems Build and Update Utility GUI disappears and a
blank screen is displayed, restart your system. This issue
occurs if you right-click to open a new browser window
(from the "Quick Reference Guide" window) and select "Quit"
from the "File" menu.
* In order to use the RAID configuration feature of Systems
Build and Update Utility to configure RAID and install the
operating system, the "Fast Initialization" parameter of the
RAID controller must be set to "ON." This setting is the
factory default of all RAID controllers.