Dell System Update Version 1.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. Copyright © 2015 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws.
Contents 1 Overview.................................................................................................................4 Transitioning from DLR to DSU............................................................................................................ 4 Other documents you might need................................................................................................. 5 2 Prerequisites for installing the Dell System Update.......................................
1 Overview Dell System Update (DSU) is an improved version of Dell OpenManage Linux Repository (DLR) to distribute Dell updates for Linux systems. The DSU distributes: • OpenManage Server Administrator • BIOS and firmware updates for different servers DSU extensively uses Yum and Zypper. • Yellowdog Updater, Modified (Yum) Yum is an open source command line package management utility used for Linux operating systems.
Dell Linux Repository (Current) Dell System Update (New) No option to revert to the earlier version Reverting to earlier version of the update is possible, if repository have earlier version Packages are based on Open Build System Packages are based on Dell Update Packages (DUPs) Updates could be pre-promoted Promoted packages are available in DSU repository Other documents you might need In addition to this guide, you can access the following guides available at dell.com/support/manuals.
Prerequisites for installing the Dell System Update 2 This section lists the specific prerequisites for installing the DSU. Supported hardware and operating system This section describes the list of supported hardware and operating systems. Supported hardware For more information on supported hardware, see linux.dell.com/repo/hardware/ omsa.html#Supported_Hardware. Supported operating system For more information on supported operation system, see linux.dell.com/repo/hardware/ omsa.
Installing OpenManage Server Administrator 3 You can install OpenManage Server Administrator using one of the following commands: • yum yum install srvadmin-all • zypper zypper install srvadmin-all NOTE: OMSA does not support installation on unsupported systems. If you receive a message like 'the system is not supported' while installing, it means the system is not supported and the installation fails. This is most common on SC-class systems, as OMSA is completely unsupported on these systems.
Updating the system using Dell System Update Configuring the system using DSU To configure the DSU repository, run the following command: wget -q -O - http://linux.dell.com/repo/hardware/dsu/bootstrap.
Choose: a to Select All Choose: n to Select None 9
Troubleshooting Dell System Update 5 The repository setup is fine, however OMSA (srvadmin) is failing to install Even though DSU does not block OMSA installation or upgrade on any server, OMSA is supported only for certain Linux distributions and PowerEdge server models. For more details on supported OS and server, check the latest OMSA documentation. DSU supports upgrade of OMSA (srvadmin), where an OMSA version is already installed in the system.
Repository conflicts for updates having different version DSU will point to incorrect updates if multiple repositories are configured which contains different versions of similar packages. It is advised to disable other repositories in such cases.
Frequently asked questions 6 This section lists some frequently asked questions about Dell System Update. How many commands do I need to execute to update my system? There are 3 commands. You should execute them in the order. For more information see Updating the system using DSU. Can I execute those three commands in any order? We recommend you to follow the order while executing the commands. For more information see Updating the system using DSU.
How can I cancel an update already selected in the given list? It works like a toggle button. For example, say if update number 7 is already selected (an asterisk (*) is there in front of 7th update in the list), and now if you choose 7 as an option, it gets cancelled. After I select the required updates, how to start the update process? Provide c option to start the update procedure. Can I select more than one update? Yes, you can select more than one update at a time.
