Users Guide
Table Of Contents
8 Using the Dell Systems Service and Diagnostics Tools
Setting Up Dell Online Diagnostics
CAUTION: Installing srvadmin-hapi or srvadmin-omilcore using the rpm
command fails on all SC platforms. Since SC platforms (for example, SC420 or
SC430) do not support Intelligent Platform Management Interface (IPMI), Memory
and DRAC diagnostics are not available on these systems.
For information on setting up Dell Online Diagnostics, refer to the Dell
Online Diagnostics User’s Guide.
To access the Dell Online Diagnostics User’s Guide, go to
support.dell.com/manuals and click Software→ Serviceability Tools→
Dell Online Diagnostics.
Setting Up Dell 32-bit Diagnostics and MP
Memory Diagnostics Utility
1
Insert the
DVD that you created into the DVD drive on a system
running Windows.
The setup program should start automatically. If it does not, at the
command prompt type
x:\setup.exe
(where
x
is the drive letter of
your DVD drive).
The
Dell Systems Service and Diagnostics Tools Home
page is displayed.
2
Select a server from the drop-down list.
3
From the
Select Drivers/Utilities Set
, select
System Utilities
, and then
click
Continue
.
4
From the
Utilities and Drivers Page,
select
Dell: 32 Bit Diagnostics
(Diagnostics Utility)
. The system prompts you for a location in which to
save the file.
5
Save the file on your system.
6
Double-click the executable file that you downloaded on your system.
7
Follow the instructions on the screen to extract the file.