Service Manual

Using the Dell Systems Service and Diagnostics Tools 7
• Network Utility —Use this utility to run diagnostics of a network card.
•
Dell Online Diagnostics —Use this utility to run operating system-based
diagnostics for your Dell system. For more information, see "Setting Up
Dell Online Diagnostics".
To access the drivers and the utilities on the Dell Systems Service and
Diagnostics Tools:
1
Insert the DVD that you created into the DVD drive on a system
running Windows.
The setup program should start automatically. If it does not, click Start 
Run , and then type x:\setup.exe (where x is the drive letter of your
DVD drive).
The
Dell Systems Service and Diagnostics Tools Home page is displayed.
2 Select a server from the drop-down list.
3 From the Select Drivers/Utilities Set , select your operating system or
system utilities and then click
Continue .
4 From the Utilities and Drivers Page , select the driver file or the utility that
you want to update by clicking the link for the device name.
The system prompts you for a location in which to save the file. Files are
delivered in compressed format. Some files may require diskettes for the
extraction.
5 Decompress the file.
For additional information about drivers and Dell OpenManage application
versions, see the Dell Systems Software Support Matrix.
Setting Up Diagnostics
Setting Up Dell Online Diagnostics
CAUTION: Installing srvadmin-hapi or srvadmin-omilcore using the rpm
command fails on all SC platforms. Since SC platforms (for example, SC420 or
SC430) do not support Intelligent Platform Management Interface (IPMI), Memory
and DRAC diagnostics are not available on these systems.