Owner's Manual

NOTE :
1. To collect hardware and storage data from ESXi remotely, install supported OpenManage Server
Administrator version on the target system.
2. DSET application cannot be installed on a system with Server Administrator version lower than 5.5.
3. DSET application (64-bit) cannot be installed on a 64-bit Linux system with Server Administrator version
lower than 6.3.
4. Only DSET application (32-bit) can be installed on ESX 4.x systems.
What’s New
 Support for Dell PowerEdge Express Flash PCIe SSDs on the following operating systems:
- Microsoft Windows Server 2012. Processor: x64/EM64T
- Microsoft Windows Server 2008 R2 or later, including Hyper-V virtualization. Processor:
x64/EM64T
- Red Hat Enterprise Linux 6.1 64 bit or later. Processor: x64/EM64T
- SUSE Linux Enterprise Server 11 SP2 64 bit or later. Processor: x64/EM64T
- VMware ESXi 5.1 or later
 Support for the following new hardware platforms: PowerEdge R220 and R920
 Support for the following new operating systems:
- Microsoft Windows 2012 R2
- Windows 2012 R2 Hyper-V
- RHEL 6.5
- SLES 11 SP3
- Cent OS 6.3
- Citrix Xen Server 6.2
- Oracle Enterprise Linux 6.4
- Oracle Virtual Machine 3.2
- ESXi 5.0 U3
- ESXi 5.1 U2
- ESXi 5.5
 Support for 9th generation PowerEdge RAID H730P controller
 Support for iDRAC firmware version 1.55.55
 Support for checking the communication between the target server and provider
Important Notes
Report Collection Prerequisites
 For report collection from iDRAC7 (out of band), the iDRAC7 firmware version must be 1.30.30 or
later.
 For report collection from OpenManage Server Administrator namespace, the OpenManage
Server Administrator services must be running.
 For remote report collection, SSH should be enabled on the target system on systems running
Linux.