User's Manual

At the command prompt, run the following command:

DellSystemInfo.exe [Options]

On Systems Running Linux

At the command prompt, run any of the following commands:

dellsysteminfo [Options]

Change directory to /opt/dell/advdiags/dset/bin and run the command

dellsysteminfo.sh [Options]

List Of CLI Options

The -h option displays the list of available CLI options. To view the options, run the following command:

• On systems running Windows: DellSystemInfo.exe -h

• On systems running Linux: dellsysteminfo -h

Table 1. Command and Description

Command Description

-h, --help Displays the help text and exit.

-s, --server Provide the details of the server to connect to. Use ’.’ to

specify the local server details.

For local report collection, the default setting is used and

this parameter is not required.

For remote report collection, the IP address of the remote

server must be provided.

For collection from an iDRAC7 source, provide the iDRAC

IP address.

-u, --username On systems running Windows, the current user name is

used by default. On systems running Linux, you must

provide the user name.

For local report collection, this parameter is optional.

For remote report collection, the user name for the remote

server must be provided and the user must have

administrator privileges on the remote server.

For collection from an iDRAC7 source, provide the iDRAC

-p, --password On systems running Windows, the current user password

is used by default. On systems running Linux, specify the

password.

For local report collection, this parameter is optional for

system running Windows but required for system running

Linux.

For collection from an iDRAC7 source, provide the iDRAC