Quick Start Manual

Device Dependency On Linux Operating System
The following table lists the devices and the dependencies that are required for Linux operating system to run DSET
application. If these device dependencies are not met, DSET application exhibits the default behavior.
Table 3. : Device, Dependency, and Default Behavior
Device Dependency Default Behavior (if dependency is not
met)
Emulex Fibre Channel Controller
• HBAnywhere utility from
Emulex. To download this
utility, access the Emulex
website at emulex.com.
a. Click Downloads → Dell.
b. Click the adapter model
number.
c. Click Linux from the
Current Drivers section
and download the
Applications Kit.
• Install libhbaapi rpm available
in the operating system DVD.
Fibre Channel Controllers are not
displayed in DSET report
QLogic Fibre Channel Controller
• SNIA API for Linux drivers. To
download this, access the
QLogic website at qlogic.com.
a. Click Downloads →
Fibre Channel
Adapters.
b. Select a model and an
operating system and
click Go.
• Install libhbaapi rpm available
in the operating system DVD.
Fibre Channel Controllers are not
displayed in DSET report
Creating One-time Local System DSET Report On Linux Operating
System
DSET application enables you to generate configuration report without permanently installing the application. This is
also known as zero footprint report collection. After the report is generated and saved on the system, all files used to
create the report are removed from the system.
To run the DSET application and create one-time report:
NOTE: You must be logged in as root user to run DSET application.
1. At the Linux shell prompt, run the ./dell-dset-lx(bit)-(Version Number).bin file.
The License Agreement is displayed along with the following message:
Do you agree to the above license terms? ('y' for yes | 'Enter' to exit):
2. Enter y.
The installation types are displayed.
16