Owner's Manual

Management Station:
1. Open TCP port 135.
2.
Add the application omremote.exe (located in InsallDirectory\bin\utils) to the Firewall
exception list.
Managed System:
If you have the Windows firewall configured, enable remote administration by running the
following command in the command prompt:
netsh firewall set service RemoteAdmin
For more information on connecting through the Windows firewall, see Microsoft's MSDN
website for
Platform SDK:
Windows Management Instrumentation (Connecting through Windows Firewall) at
http://msdn.microsoft.com/en-us/library/aa389286 ( VS.85).aspx
http://support.microsoft.com/kb/875605
For Windows Server 2008 onwards, see the following link:
http://msdn.microsoft.com/en-us/library/aa822854(VS.85).aspx
• Software -> Linux OS -> Display information is not available from a RHEL 6.1 64-bit system due to changes in
xorg.conf. (DSET-51)
• USB CD-ROM or DVD-ROM drive information is not displayed in the Storage section. (DSET-69)
• Chassis -> Hardware logs are missing in Linux to Linux remote reports when any version of Dell Open Manage
Server Administrator(OMSA) is installed on
the target Linux system. (DSET-68)
• On Linux systems, Storage -> Fibre Channel HBA devices are not displayed in the Storage section of DSET reports
due to missing Emulex or QLogic drivers. (DSET-66)
Resolution :
o For Emulex Fibre Channel Controller:
Download HBAnywhere utility from Emulex.
To download this utility, access the Emulex website at emulex.com.
1. Click Downloads -> Dell .
2.
Click the adapter model number.
3. Click Linux from the Current Drivers section and download the Applications Kit.
4.
Install libhbaapi rpm available in the operating system DVD.
o For QLogic Fibre Channel Controller:
Download SNIA API for Linux drivers. To download
this, access the QLogic website at qlogic.com .
1. Click Downloads -> Fibre Channel Adapters .
2.
Select a model and an operating system and click Go .