Owner's Manual
•
PyWBEM 0.7
•
7-Zip 4.65
•
Plink 0.55
•
Pscp 0.58
•
Libxml2 2.6.27
•
Libxslt 1.1.27
•
sblim-sfcb 1.3.11
•
python cmpi-bindings 0.4.0-7.1
•
sblim-indication_helper 0.4.2
•
sblim-cmpi-base 1.5.5
•
cim-schema 2.19
The modified open source libraries are available at the following location:
http://opensource.dell.com/releases/dset/3.4.0/DSET340.iso
Known Issues
Fixed Issues/de
•
On T110 II systems with Windows 2008 SP2 x64 bit operating system, the slot information for external
controller
(
PERC 6E) is displayed as Embedded under
Storage
->
Dell PERC 6E Controller
. (DSET-47)
•
Network information under
Software
->
Linux OS
section may be missing for PowerEdge M910 systems running
RHEL 6.1. Most networking information can be found under the Chassis -> Network section instead. (DSET-50)
•
DSET always presents
Start Menu
->
Create
Report
for collection on the local system even if there is no Remote
Provider or OMSA provider installed locally.
(DSET-46)
•
When collecting hardware, storage, or software information remotely from R710 system with Windows 2008 R2 SP1
operating system to T110II system with SLES 10 SP4 x64 operating system, raw XML is displayed in the report.
(DSET-35)
•
When the size of the virtual disk is less than the maximum capacity of the raid size,
Available Disk Space
and
Used Disk Space
information is not displayed under Virtual disk. (DSET-37)
•
The message A System Configuration Report has not been created yet may appear on the report's main Storage
page if the report was collected through the OMSA namespace. (DSET-39)
•
View Report
is not available in the
Start
->
DSET
version menu on Windows systems. (DSET-44)
•
On Windows operating system, Remote report from any Microsoft Windows system, in different domain fails when
the report is collected through Dell OpenManage Server Administrator(OMSA) namespace. (DSET-59)
Work Around
:
To enable the successful functioning of remote report collection from OMSA ensure the following:
o
The managed system and the management station are
on the same domain or there is a trust relationship
between the two domains.
o
If you have a Windows Firewall configured on the management station or the managed system, make the
following configuration changes to enable remote Server Administrator CLI and software updates to work
successfully.