User's Manual

Change directory to

/opt/dell/advdiags/dset/bin and run the command

dellsysteminfo.sh [Options]

List Of CLI Options

The

-h option displays the list of available CLI options. To view the options, run the following command:

• For Windows:

DellSystemInfo.exe -h

• For Linux:

dellsysteminfo -h

Table 5. : Command and description

Command Description

-h, --help Display the help text and exit.

-s, --server Specify the server to connect to. Use ’.’ to specify the

local server.

For local report collection, the default setting is used and

this parameter is not required.

For remote report collection, the remote server's IP

address must be provided.

For collection from iDRAC7 source, provide the iDRAC IP

address.

-u, --username For Windows, the current user name is used by default.

For Linux, specify the user name.

For local report collection, this parameter is optional.

For remote report collection, the user name for the remote

server must be provided and the user must have

administrator privileges on the remote server.

For collection from iDRAC7 source, enter the iDRAC login

user name.

-p, --password For Windows, the current user’s password is used by

default. For Linux, specify the password.

For local report collection, this parameter is optional for

Windows but required for Linux.

For local report collection, this parameter is optional for

Windows but required for Linux.

For collection from iDRAC7 source, enter the iDRAC login

password.

NOTE

: If -p is not included in the command, then you

will receive a prompt to enter the password.

-d, --collect Specify the type of data to be collected (one or more of

the following) separated by a comma without any space:

• hw: Server

• st: Storage

• sw: Software

• lg: Logs

• ad: Advanced logs