Owner's Manual

Using GUI :
To clear hardware logs:
1. Navigate to DSET 3.3 -> Clear ESM Logs in the Start menu .
The Clear ESM Logs command window displays the following message:
2. Enter Y to clear the logs. The following messages are displayed:
3. Press any key.
The command window closes.
Extracting MSI Package For Large Site Automated Deployment
To extract the MSI file out of DSET EXE:
1. Run the Dell_DSET_3.3.0.x.exe file.
The Welcome to the Dell System E-Support Tool (3.3) Installation Wizard window is displayed.
2. The MSI is already extracted at the following location:
C:\Program Files\Common Files\Wise Installation Wizard
NOTE : The MSI location for Windows (x86) systems is C:\Program Files\Common Files\Wise Installation Wizard and
for Windows (x86_64) systems is C:\Program Files (x86)\Common Files\Wise Installation Wizard.
The folder must contain only one MSI file that can be copied and renamed if required.
3. Cancel the DSET installer to remove the embedded MSI package.
For Linux:
Creating One-time Report (Zero Footprint)
DSET enables you to generate a configuration report without permanently installing DSET. This is also known as "Zero
Footprint" report collection. After the report is generated and saved on the system, all files used to create the report are
removed from the system.
To run DSET and create one-time report:
NOTE : You must be logged in as root user to run DSET.
1. At the Linux shell prompt, run the ./dell-dset-lx(bit)-3.3.0.x.bin file.
The License Agreement is displayed along with the following message:
2. Enter y.
The installation types are displayed.