Owner's Manual

 Network information under Software -> Linux OS section may be missing for PowerEdge M910 systems running
RHEL 6.1. Most networking information can be found under the Chassis -> Network section instead. (2425)
 On Windows system the Device Name attribute of Virtual Disks is blank in the Storage information for H200
controller. (2381)
 DSET Collector always presents Start Menu -> Create Report for collection on the local system even if there is no
DSET or OMSA provider installed locally. (2387)
 When collecting hardware, storage, or software information remotely from R710 system with Windows 2008 R2 SP1
operating system to T110II system with SLES 10 SP4 x64 operating system, raw XML is displayed in the report.
(2095)
 When the size of the virtual disk is less than the maximum capacity of the raid size, Available Disk Space and
Used Disk Space information is not displayed under Virtual disk. (2118)
 The message "A System Configuration Report has not been created yet" may appear on the report's main Storage
page if the report was collected through the OMSA namespace. (2174)
 On Linux operating systems, DSET leaves few kernel modules like ipmi, mpt2sas, raid_class, nls_utf8, cifs still
loaded after execution. (1193)
 View Report is not available in the Start -> DSET menu on Windows systems. (2350)
 On Windows operating system, Remote report from any Microsoft Windows system, in different domain fails when
the report is collected through Dell OpenManage Server Administrator(OMSA) namespace. (2722)
Work Around :
To enable the successful functioning of remote report collection from OMSA ensure the following:
o The managed system and the management station are on the same domain or there is a trust relationship
between the two domains.
o If you have a Windows Firewall configured on the management station or the managed system, make the
following configuration changes to enable remote Server Administrator CLI and software updates to work
successfully.
Management Station:
1. Open TCP port 135.
2. Add the application "omremote.exe" (located in InsallDirectory\bin\utils) to the Firewall
exception list.
Managed System:
If you have the Windows firewall configured, enable remote administration by running the
following command in the command prompt:
"netsh firewall set service RemoteAdmin"
For more information on connecting through the Windows firewall, see Microsoft's MSDN
website for Platform SDK:
Windows Management Instrumentation (Connecting through Windows Firewall) at
http://msdn.microsoft.com/en-us/library/aa389286 ( VS.85).aspx