Owner's Manual

10 = User has chosen not to install or run sfcb.
11 = CIMOM architecture and installer architecture are not the same.
12 = Either root password is incorrect or CIMOM is not functional.
13 = DSET 3.3 full is already installed, but user has passed -qi or -qn option.
14 = User has not agreed to the license terms.
15 = Silent uninstallation is complete.
16 = Silent installation of full DSET is complete.
17 = Silent ZFP report collection is complete.
18 = User has aborted the installation.
19 = Invalid installer option is passed.
20 = Failed to install collector rpm.
21 = Failed to install provider rpm.
22 = User has not selected any option, hence aborted ZFP report collection.
23 = Only collector is installed, but user has passed -qn option.
24 = Only provider is installed, but user has passed -qn option.
25 = Partial installation of DSET is found on the machine, but user has passed -qi option.
26 = Silent installation of collector is complete.
27 = Silent installation of provider is complete.
28 = User has tried to install earlier version of DSET on a machine where a higher version already exists.
29 = Earlier version of DSET <= 2.2 installed on the system is supported for DSET upgrade, but user has passed -qn option.
30 = Earlier version of DSET <= 2.2 installed on the system is supported for DSET upgrade, but user has passed invalid
parameter along with -qi option.
Known Issues
Fixed Issues/de
 On Windows operating systems if OpenManage Server Administrator (OMSA) 6.x is installed after DSET is installed,
OMSA Data Manager fails to start and all hardware and storage information is not available in the report. (2388)
 Global Hot Spare information is not available for storage devices in the DSET report. (2408)
 On T110 II systems with Windows 2008 SP2 x64 bit operating system, the slot information for external controller
( PERC 6E) is displayed as Embedded under Storage -> Dell PERC 6E Controller . (2412)
 Hardware and storage information may be missing in DSET report collected through OMSA namespace if the
target machine has Windows Server SBS 2011. (2416)