Owner's Manual

o If you have selected DSET CIM Provider only option, then the following message is displayed:
The DSET CIM Providers installation completed successfully.
DSET is installed at the /opt/dell location by default.
For silent installation, run the command:
Clearing Hardware Log On Linux
DSET clears Dell hardware logs (Embedded System Management logs) from the system without permanently installing the
application.
To clear hardware logs from the system:
NOTE : You must be logged in as a root to run DSET.
1. At the linux shell prompt, run the ./dell-dset-lx(bit)-3.3.0.x.bin file.
The License Agreement is displayed along with the following message:
2. Enter y.
The installation types are displayed.
3. Enter <option number> to select Clear ESM Hardware Log option.
4. Enter y to clear the logs. The following messages are displayed:
5. Press any key. DSET exits and the Linux shell prompt appears.
Upgrading DSET
You can upgrade to DSET 3.3 from any of the following previous versions:
 DSET 1.8
 DSET 1.9
 DSET 2.0
 DSET 2.1
 DSET 2.2
 DSET 3.2.0
NOTE : For versions earlier to DSET 1.8, automatic upgrade to DSET 3.3 is not possible. When the DSET 3.3 installer is run,
the installer terminates with an error message. In such cases, uninstall previous versions of DSET and then install DSET 3.3.
NOTE : DSET does not require a system reboot.
For Windows
Using GUI
To automatically upgrade to DSET 3.3 using the installer:
1. Run the Dell_DSET_3.3.0.x.exe file.
The Welcome to the Dell System E-Support Tool (3.3) Installation Wizard window is displayed.
2. Click Next .