User's Manual

36 Using DSET
NOTE: For few Windows operating systems (2003 R2, 2008, 2008 SBS, and 2011
SBS), you must run DSET in elevated previlege mode, where User Access Control
(UAC) is enabled. To do this, right-click on Create Basic DSET Report or Create
Advanced DSET Report, select Run As Administrator, and provide administrator
password.
For Linux, see "CLI Options".
CLI Options
This section provides the CLI options for Windows and Linux operating
systems.
For Windows Operating System
To start the CLI mode, in the Start menu, navigate to DSET 3.2DSET
CLI. The DSET CLI command window opens and displays the location of
the installed DSET support files as:
C:\Program Files\Dell\AdvDiags\DSET\bin
NOTE: If you are using a 64-bit Windows Operating System, the CLI command
window displays the location of the installed DSET support files as:
C:\Program Files(x86)\Dell\AdvDiags\DSET\bin
At the command prompt, run the following command
DellSystemInfo.exe [Options]
For Linux Operating System
At the command prompt, run any of the following commands:
dellsysteminfo [Options]
Or
Change directory to /opt/dell/advdiags/dset/bin and run the command
dellsysteminfo.sh [Options]
List of CLI Options
The -h option displays the list of available CLI options. To view the options,
run the following command:
•For Windows: DellSystemInfo.exe -h
• For Linux: dellsysteminfo -h