User's Manual

Installing, Upgrading, and Running DSET On Linux Operating System 31
The License Agreement is displayed along with the following message:
Do you agree to the above license terms? ('y' for
yes | 'Enter' to exit):
2
Enter y.
The installation types are displayed.
3 Enter 6 to select Clear ESM Hardware Log option.
*Going to clear the ESM Logs now
Do you want to continue? Y/N:
4
Enter y to clear the logs. The following messages are displayed:
System Event Logs are cleared.
Press Any Key To Continue
5
Press any key. DSET exits and the Linux shell prompt appears.
Upgrading DSET On Linux Operating System
You can upgrade to DSET 3.2 from any of the following previous versions:
• DSET 1.8
•DSET 1.9
•DSET 2.0
• DSET 2.1
•DSET 2.2
NOTE: For versions lower than DSET 1.8 automatic upgrade to DSET 3.2 is not
possible. When the DSET 3.2 installer is run, the installer terminates with an error
message.
In such cases, uninstall previous versions of DSET and then install DSET 3.2.
NOTE: DSET does not require a system reboot.
To automatically upgrade to DSET 3.2 on Linux operating system:
1
At the Linux shell prompt, run the ./dell-dset-lx(bit)-(Version
Number).bin
file.
The
License Agreement is displayed along with the following message: