User's Manual

24 Installing, Upgrading, and Running DSET On Linux Operating System
– Platform is Dell PowerEdge 9, 10, 11, or 12th generation server.
– OpenManage Server Administrator (if installed)version is between 5.5
to 7.0.
Device Dependency On Linux Operating System
The following table lists the devices and the dependencies that are required
for Linux operating system to run DSET. If these device dependencies are not
met, DSET exhibits the default behavior.
Table 2-2. Device, Dependency, and Default Behavior
Device Dependency Default Behavior (if
dependency is not
met)
Emulex Fibre Channel
Controller
•HBAnywhere utility from
Emulex.To download this
utility, access the Emulex
website at
emulex.com .
1 Click Downloads  Dell .
2 Click the adapter model
number.
3 Click Linux from the Current
Drivers section and download
the
Applications Kit .
• Install libhbaapi rpm available
in the operating system DVD.
Fibre Channel
Controllers are not
displayed in DSET
report
QLogic Fibre Channel
Controller
• SNIA API for Linux drivers.
To download this, access the
QLogic website at qlogic.com .
1 Click Downloads  Fibre
Channel Adapters .
2 Select a model and an
operating system and click
Go .
• Install libhbaapi rpm available
in the operating system DVD.
Fibre Channel
Controllers are not
displayed in DSET
report