Owner's Manual

Work Around :
To enable the successful functioning of remote report collection from OMSA ensure the following:
o The managed system and the management station are on the same domain or there is a trust relationship
between the two domains.
o If you have a Windows Firewall configured on the management station or the managed system, make the
following configuration changes to enable remote Server Administrator CLI and software updates to work
successfully.
Management Station:
1. Open TCP port 135.
2. Add the application "omremote.exe" (located in InsallDirectory\bin\utils) to the Firewall
exception list.
Managed System:
If you have the Windows firewall configured, enable remote administration by running the
following command in the command prompt:
"netsh firewall set service RemoteAdmin"
For more information on connecting through the Windows firewall, see Microsoft's MSDN website
for Platform SDK:
Windows Management Instrumentation (Connecting through Windows Firewall) at
http://msdn.microsoft.com/en-us/library/aa389286 ( VS.85).aspx
http://support.microsoft.com/kb/875605
For Windows Server 2008 onwards, see the following link:
http://msdn.microsoft.com/en-us/library/aa822854(VS.85).aspx
 Software -> Linux OS -> Display information is not available from a RHEL 6.1 64-bit system due to changes in
xorg.conf. (2426)
 USB CD-ROM or DVD-ROM drive information is not displayed in the Storage section. (2773)
 "Read Policy" and "Write Policy" information is not displayed under Virtual Disks on some Windows 2008 R2 systems.
(2774)
 Chassis -> Hardware logs are missing in Linux to Linux remote reports when any version of Dell Open Manage Server
Administrator(OMSA) is installed on the target Linux system. (2771)
 On Linux systems, Storage -> Fibre Channel HBA devices are not displayed in the Storage section of DSET reports
due to missing Emulex or QLogic drivers. (2754)
Resolution :
o For Emulex Fibre Channel Controller:
Download HBAnywhere utility from Emulex. To download this utility, access the Emulex website at
emulex.com.
1. Click Downloads->Dell.
2. Click the adapter model number.