Owner's Manual

2. Enter y.
The installation types are displayed.
3. Enter 4 to select Install DSET Collector option.
4. Wait for the installation to complete. The DSET Collector installation completed successfully message is displayed.
DSET collector is installed at opt/dell/ location by default.
Installing DSET CIM Provider
To permanently install DSET CIM Provider:
NOTE : You must be logged in as root to install DSET CIM Provider.
1. At the Linux shell prompt, run the ./dell-dset-lx(bit)-3.2.0.x.bin file.
The License Agreement is displayed along with the following message:
2. Enter y.
The installation types are displayed.
3. Enter 5 to select Install DSET CIM Provider option.
If SFCB or OpenPegasus is not installed or running, the following message is displayed:
4. Enter y.
If OpenPegasus is installed and running, the following message is displayed:
5. Enter the root credentials when the following message is displayed:
Wait for the installation to complete. The DSET CIM Providers installation completed successfully message is
displayed. DSET CIM Provider is installed at /opt/dell location by default.
Clearing Hardware Log On Linux
DSET clears Dell hardware logs (Embedded System Management logs) from the system without permanently installing the
application.
To clear hardware logs from the system:
NOTE : You must be logged in as a root to run DSET.
1. At the linux shell prompt, run the ./dell-dset-lx(bit)-3.2.0.x.bin file.
The License Agreement is displayed along with the following message:
2. Enter y.
The installation types are displayed.
3. Enter 6 to select Clear ESM Hardware Log option.