Users Guide

Example 2: To collect report information and auto upload to Dell Technical Support using authenticated

proxy, run the command:

• On systems running Windows

C:\Program Files\Dell\AdvDiags\DSET\bin> DellSystemInfo.exe –a auto –r C:

\temp\dset_report.zip –x <IP_ADDRESS> –y lab\test –s <IP_ADDRESS> –u

Example 3: To collect report information from an iDRAC7 or iDRAC8 source.

• C:\Program Files\Dell\AdvDiags\DSET\bin> DellSystemInfo.exe -s<iDRAC

IP_Address> -u <username> -p<password> -r C:\temp\dset_report.zip

NOTE: Limited data is collected from the iDRAC7 or iDRAC8 source.

Zero FootPrint Report Collection

Example 1: To collect software and hardware information silently and save it in the specified location, run

the following command:

• On systems running Windows: Dell_DSET_3.7.x.exe REPORTNAME=<NAME>

COLLECT=<hw,sw> /qn

• On systems running Linux: dell-dset-lx(bit)-(Version_Number).bin –qn -d <hw,sw> -

r<reportname>

Viewing DSET Report

You can view the hardware, storage, and software data in the generated report using the GUI. The logs

and advanced log information are available in the log files located in the logs folder (part of the

.zip file).

To view the report:

• On systems running Windows, unzip the .zip file using the password ’dell’.

• On systems running Linux, copy the .zip file to Windows system and unzip the file using the

password ’dell’.

After you unzip, read the ReadmeFirst.txt file for instructions to view the report.