Dell EMC PowerEdge Systems SUSE Linux Enterprise Server 15 Installation Instructions and Important Information
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2018 - 2019 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents 1 Overview........................................................................................................................................................ 4 System configuration requirements................................................................................................................................. 4 Operating system architecture................................................................................................................................... 4 Memory....
1 Overview SUSE Linux Enterprise Server 15 is available on the 64-bit Intel architecture. Topics: • System configuration requirements • Reviewing preconfiguration options System configuration requirements For more information on system configuration requirements for SUSE Linux Enterprise Server 15, see the documentation at www.suse.com/documentation. Operating system architecture Dell EMC supports the x86_64 version of SUSE Linux Enterprise Server 15 on all Dell EMC PowerEdge servers.
Table 2. Bootable disk size Interface Disk/LUN BIOS or UEFI Lesser than 2.2 TB UEFI Greater than 2.2 TB Reviewing preconfiguration options The following sections describe packages and options that are installed or preconfigured by Dell EMC. Dell EMC preinstalled operating system packages Dell EMC has preinstalled operating system packages on your system that provides the features that are required by the system users.
2 Creating SUSE Linux Enterprise Server 15 installer media SUSE Linux Enterprise Server 15 installer ISOs are available for download at www.suse.com/download-linux/ for users with valid SUSE Linux Enterprise Server 15 subscription.
3 Installing or reinstalling SUSE Linux Enterprise Server Important information before installing Select the boot mode to be used for the system during installation. There are two boot modes available on Dell EMC PowerEdge Servers. • BIOS • UEFI NOTE: The boot configurations of UEFI and BIOS are different. Hence, the installed system must boot using the same firmware that was used during installation.
3 In the right pane, click Deploy OS. NOTE: If your system has a RAID controller, you must configure RAID before you continue with the installation of drivers. 4 From the list of operating systems, select SUSE Linux Enterprise Server 15x86_64 bit. LC extracts the driver update disk to an internal USB drive labeled OEMDRV. After the drivers are extracted, LC prompts you to insert the operating system installation media. 5 Click Next. 6 Select BIOS or UEFI when prompted, and click Next.
For a list of add-on device drivers that are installed on your system, type the following command at the command prompt: rpm -qa | grep kmp. NOTE: For more information on add-on drivers, see the driver update program at www.drivers.suse.com. Updating your system packages by using SUSE Customer Center or Repository Mirroring tool SUSE periodically releases software updates to fix issues, address security issues, and add new features and hardware support.
4 Getting help Topics: • Contacting Dell EMC • Related documentation for Linux • Documentation resources • Download the drivers and firmware • Documentation feedback Contacting Dell EMC Dell EMC provides several online and telephone-based support and service options. Availability varies by country, region, and product, and some services may not be available in your area. To contact Dell EMC for sales, technical assistance, or customer service issues, see www.dell.com/contactdell.
Task Document Location the Getting Started Guide that is shipped with your server. Configuring your server Managing your server For information about the iDRAC features, configuring and logging in to iDRAC, and managing your server remotely, see the Integrated Dell Remote Access Configuration Tool User's Guide www.dell.com/idracmanuals For information about installing the operating system, see operating system documentation. www.dell.
Task Document Location management, see the OpenManage Connections Enterprise Systems Management documents. For information about viewing www.dell.com/esmmanuals inventory, performing configuration, and monitoring tasks, remotely turning on or off servers, and enabling alerts for events on servers and components using the Dell EMC Chassis Management Controller (CMC), see the Chassis Management Controller User's Guide .
Documentation feedback You can rate the documentation or write your feedback on any of our Dell EMC documentation pages and click Send Feedback to send your feedback.
