Manualshelf

Users Guide

ManualsBrandsDell ManualsSoftwareDell Supported Configurations for Oracle Database 10g R2 for Windows
11121314151617181920
14 Fibre Channel Cluster Setup
To configure your Oracle cluster storage system in a four-port, SAN-attached
configuration (see Figure 2-2):
1
Connect one optical cable from SP-A port 0 to Fibre Channel switch 0.
2
Connect one optical cable from SP-A port 1 to Fibre Channel switch 1.
3
Connect one optical cable from SP-B port 0 to Fibre Channel switch 1.
4
Connect one optical cable from SP-B port 1 to Fibre Channel switch 0.
5
Connect one optical cable from HBA 0 on node 1 to
Fibre
Channel switch 0.
6
Connect one optical cable from HBA 1 on node 1 to
Fibre
Channel switch 1.
7
Connect one optical cable from HBA 0 of each additional node to
Fibre
Channel switch 0.
8
Connect one optical cable from HBA 1 of each additional node to
Fibre
Channel switch 1.