Users Guide

Fibre Channel Cluster Setup 13
Cabling Your Dell/EMC Fibre Channel Storage
You can configure your Oracle cluster storage system in a four-port storage
area network (SAN) attached configuration, depending on your needs.
See the following procedures for both configurations.
Figure 2-2 illustrates the hardware connections used in setting up a
SAN-attached Fibre Channel cluster.
Figure 2-2. Cabling in a Dell/EMC SAN-Attached Fibre Channer Cluster
Two HBA Ports for Node 1
Two HBA Ports for Node 2
sw1
Dell/EMC CX4-480 Fibre Channel Storage
sw0
SP-B
SP-A